FDM (fusion deposition modeling) ABS plastic printing. Using ABSplus™ production-grade thermoplastic, models are plastic printed from the bottom up with precisely deposited layers of modeling and support material. There's no waiting for models to “cure” — they're hard right out of the printer. A water-based solution removes the support material to complete your detailed design. Click on the picture below to see the Amber support material before its dissolved away.
(Not all colors in stock at all times)
(Colors may be different then shown due to computer differences)
 |
Models are printed in hours (depending on part size) with a choice between dense and sparse filled to save plastic and time. |
|
Multiple parts can run at the same time within printer's build envelope. |
|
Models can be drilled, tapped, filled, sanded and painted. |
|
Metal threaded Inserts are easily added. |
|
Can print difficult or impossible to machine parts. |
|
Complex parts and contours are not a problem. |
|
Great for quick turn around part iterations. |
|
Build envelope 254 x 254 x 305 mm (10 x 10 x 12 inches). |
|
Layer thickness is .254 mm (.010 in.) or .33 mm. (.013 in.) |
|
Minimum line width is .508 mm (.020 in.) |
25% OFF ON YOUR FIRST
3D PRINT RUN!!
E-MAIL AN STL OR IGES FILE FOR A FREE QUOTE!!
Here are a couple of links which demonstrate how 3D printing works.
ENGO CORP POLYPROTO
25971 Miramonte Drive, Mission Viejo, CA 92692 918 West Lincoln Avenue #5, Anahiem CA92805
(V) 949-305-1504 (Fax) 949-305-1504 (V) 714-656-2415 (Fax) 714- 774-6516
engocorp@cox.net www.polyproto.com